15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/07/11 schematics allied da tec ode AHTA-1603S dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 0.813(20.65) 0.386(9.8) 0.300 (7.62) 0.126(3.20) 0.20 ( 0.50 ) 0.100 (2.54) 0.700(17.78) 0.240(6.10) all specifications subject to change without notice. mechanical 10/100 base t single port transformer AHTA-1603S polarity: 1-16, 6-11, in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 0.9 operating temp: 0oc to 70oc max cw/w: 25pf typ @ 100khz, 0.2v electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-1603S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -16 60-80mhz -12 50mhz -14.5 part number AHTA-1603S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) 60s -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -35 0.3-30mhz -42 60mhz isolation ?
|
